Micromeritics AccuPyc II 1340 Operator's Manual page 15

AccuPyc II 1340
Large-Volume Core Pycnometer
The AccuPyc Large-Volume pycnometer sample chamber has been designed to address the specific
needs of operations that require pore volume knowledge of intact drilling cores. This instrument elimi-
nates the need to break core samples into smaller pieces prior to being analyzed.
The large-volume core pycnometer:
• Has a large sample chamber with a volume of approximately 2000 cm
• Has a sample chamber can accommodate a 95 mm (3.74 in.) diameter core of up to
278 mm (10.9 in.) in length.
FoamPyc
A FoamPyc option for measuring open- and closed-cell foam materials is available in the following
configurations for the standard and temperature-controlled pycnometers:
• 100-cm
• 10-cm
This unit can be ordered initially with the FoamPyc application installed, or if you have a standard
AccuPyc, you can upgrade with a software enhancement via USB media.
MultiVolume Inserts
A MultiVolume option allowing you to analyze smaller-sized samples with your current AccuPyc
model is available for the following configurations:
3
• 1-cm
• 10-cm
• 100-cm
• 2000-cm
Each kit includes appropriate insert(s), reference standard(s), and sample cup(s). Instructions for using
multivolume inserts are located in
INFORMATION, page
Multigas Option
The Multigas Option enables you to connect up to four gases to one analyzer. Installation and opera-
tion instructions are provided in
INFORMATION, page
Aug 2013
3
nominal cell volume (recommended)
3
nominal cell volume
nominal cell volume, contains a 0.1 cm
3
nominal cell volume, contains 1- and a 3.5-cm
3
nominal cell volume, contains 10- and 35-cm
3
nominal cell volume, contains 650- and 1300-cm
MULTIVOLUME
6-1 for additional information.
MULTIGAS
6-1 for details on placing an order.
3
cup
3
3
INSERTS, page J-1. Refer to
OPTION, page K-1. Refer to
Equipment Description
3
.
cups
cups
3
cups
ORDERING
ORDERING
1-7