Micromeritics AccuPyc II 1340 Operator's Manual page 51

AccuPyc II 1340
Calibration Data
The sample cell volume and the expansion cell volume are used for calculating the sample volume.
The cell volume and expansion volume are updated automatically when the pycnometer is calibrated.
These prompts enable you to view current calibration data.
Unit[n] SN1234 10 cm3
Set-up Type?
Calibration Data
Unit[n] SN1234 10 cm3
Calibration Data
Chamber Insert?
None
Unit[n] SN1234 10 cm3
Calibration Data
Cell Volume:
(value from calibration)
Unit[n] SN1234 10 cm3
Calibration Data
Expansion Volume:
(value from calibration)
Aug 2013
Press until Calibration Data is displayed, then
CHOICE
press .
ENTER
Displays when you select Yes at the Request insert prompt
in Report Options.
Choices: None, 0.1 cm
None, 3.5 cm
3
None, 35 cm
None, 650 cm
pycnometer)
Refer to Calibrating Inserts, page
information.
Press until the appropriate insert is displayed, then
CHOICE
press .
ENTER
Displays the cell volume determined during calibration.
Range: 0.01 to 999.0000 cm
Press .
ENTER
Displays the expansion volume determined during
calibration.
Range: 0.5 to 999.0000 cm
Press ENTER .
3 3
(for 1 cm pycnometer)
3 3 3
, 1.0 cm (for 10 cm pycnometer)
3 3
, 10 cm (for 100 cm pycnometer)
3 3
, 1300 cm (for 2000 cm
J-7 for additional
3
3
System Commands
3
3-17