Coding Element - Siemens SIMATIC ET 200SP HA System Manual

Configuration
Table 3-5 Ex I/O module
You can find information on the available Ex I/O module types in the
online catalog.
Information and downloads (Page 16)
3.4.5

Coding element

Definition
The mechanical coding element is a component of the Ex I/O module.
Configuration
Table 3-6 Coding element (for Ex BaseUnit)
This element encodes the type of the plugged Ex I/O module.
You can find information on the function and handling of the coding
elements in the system documentation of the distributed I/O used:
• SIMATIC ET 200SP HA
• SIMATIC ET 200SP
Modules for devices in a hazardous area
System Manual, 04/2021, A5E50165138-AA
Function
Function
System overview
3.4 Components
Figure
Figure
25