Siemens SIMATIC ET 200SP HA System Manual page 116

Technical specifications
11.7 Technical specifications of subcomponents of the Ex module group
Ex BaseUnit type W0 for Ex power module Ex-PM E
Article number
General information
Product type designation
Product function
•
Current carrying capacity
For P1 and P2 bus, max.
Hardware configuration
Formation of potential groups
•
•
Slots
•
Potential separation
between backplane bus and supply voltage
Isolation
Isolation tested with
Ambient conditions
Ambient temperature during operation
•
•
•
•
Altitude during operation relating to sea level
•
Dimensions
Width
Height
Depth
Weights
Weight, approx.
116
I&M data
New potential group
Potential group continued from the left
Number of slots
horizontal installation, min.
horizontal installation, max.
vertical installation, min.
vertical installation, max.
Installation altitude above sea level, max.
6DL1193-6BP00-0DW0
BU type W0
Yes; Asset data
10 A
Yes
No
1
Yes
further information on insulation can be found in
the "ET 200SP HA / ET 200SP modules for devices in
hazardous areas" System Manual
-40 °C
70 °C
-40 °C
60 °C
2 000 m
50 mm
117 mm
19 mm
38 g
Modules for devices in a hazardous area
System Manual, 04/2021, A5E50165138-AA