10.2
Interrupts
The Ex power module supports diagnostic interrupts. Diagnostic and maintenance messages are
output via diagnostic interrupts.
You can find more information on this in the appendix:
Diagnostic and maintenance messages (Page 131)
Diagnostic messages
The Ex power module generates a diagnostic message when the following events occur:
• Parameter assignment error
• No supply voltage
• Channel/component temporarily unavailable
• The retentive memory in the BaseUnit is defective
• Invalid BaseUnit
Maintenance messages
The Ex power module generates a maintenance message when the following events occur:
• The retentive memory in the BaseUnit is defective
Modules for devices in a hazardous area
System Manual, 04/2021, A5E50165138-AA
Displays and interrupts
10.2 Interrupts
97