Siemens SIMATIC ET 200SP HA System Manual page 117

Ex BaseUnit type X1 for Ex I/O module
Article number
General information
Product type designation
Product function
•
Current carrying capacity
For P1 and P2 bus, max.
For process terminals, max.
Hardware configuration
Temperature sensor
Formation of potential groups
•
•
Slots
•
Potential separation
between backplane bus and supply voltage
between process terminals and supply voltage
Isolation
Isolation tested with
Ambient conditions
Ambient temperature during operation
•
•
•
•
Altitude during operation relating to sea level
•
Connection method
Terminals
•
•
•
•
Dimensions
Width
Height
Depth
Weights
Weight, approx.
Modules for devices in a hazardous area
System Manual, 04/2021, A5E50165138-AA
11.7 Technical specifications of subcomponents of the Ex module group
I&M data
New potential group
Potential group continued from the left
Number of slots
horizontal installation, min.
horizontal installation, max.
vertical installation, min.
vertical installation, max.
Installation altitude above sea level, max.
Terminal type
Conductor cross-section, min.
Conductor cross-section, max.
Number of process terminals to I/O module
Technical specifications
6DL1193-6BP00-0BX1
BU type X1
Yes; Asset data
10 A
0.5 A
Yes; For internal reference junction with connect‐
ing thermocouple
No
Yes
1
Yes
Yes
further information on insulation can be found in
the "ET 200SP HA / ET 200SP modules for devices in
hazardous areas" System Manual
-40 °C
70 °C
-40 °C
60 °C
2 000 m
Push-in terminal
0.14 mm²
2.5 mm²
8
20 mm
117 mm
35 mm
42 g
117