Technical Specifications; Standards And Approvals; Currently Valid Markings And Approvals - Siemens SIMATIC ET 200SP HA System Manual

Technical specifications

11.1

Standards and approvals

11.1.1

Currently valid markings and approvals

Introduction
This section contains the technical specifications of the system:
• The standards and test values which the distributed I/O system complies with and fulfills.
• The test criteria according to which the distributed I/O system was tested.
Technical specifications of the modules
The technical specifications of the individual modules are also provided in the manuals for the
relevant modules. If the information in this document differs from that in the manuals, the
manuals take priority.
Validity of the information on the components
NOTICE
Markings and approvals
In the manual you can find the markings and approvals which are generally possible or planned
in the system.
However, only the label or approval printed on the component of the distributed I/O system is
valid!
Information on certificates and approvals
The following are delivered with the product:
• The product information in which all certificates and distributed approvals at the time of the
delivery are listed.
• These certificates and registration certificates are available on the supplied USB stick.
The certificates for the markings and approvals can be found on the Internet under
Service&Support (http://support.industry.siemens.com/cs/).
Modules for devices in a hazardous area
System Manual, 04/2021, A5E50165138-AA
11
99