Module/Channel Parameters - Siemens SIMATIC ET 200SP HA System Manual

Parameters for the Ex power module

8.2 Module/channel parameters

8.2 Module/channel parameters
Parameters of the Ex power module Ex-PM E
You have the following setting options:
Table 8-1 Parameters and their default settings
Parameters
Diagnostics missing sup‐
ply voltage L+
Potential group
80
Value range
• Enabled
• Disabled
New intrinsically safe po‐
tential group
Default
Enabled
New intrinsically safe po‐
tential group
Changing parameter Efficiency range
settings in RUN
Yes Module
No Module
Modules for devices in a hazardous area
System Manual, 04/2021, A5E50165138-AA