Avaya 5000 Series Troubleshooting Manual page 77

2. Verify whether the EAPOL global setting is enabled.
3. Verify whether the EAPOL UBP global setting is enabled.
4. Verify whether the EAPOL port status is AUTO.
Enabling EAPOL globally
About this task
Enable EAPOL globally for the switch.
Procedure
1. Use the eapol enable command to enable EAP globally.
2. Verify if errors are displayed. No error or warning messages should be displayed.
Enabling EAPOL UBP globally
About this task
Enable EAPOL UBP globally for the switch.
Procedure
1. Use the eapol user-based-policies enable command to enable EAPOL
2. Verify if errors are displayed. No error or warning messages should be displayed.
Enabling EAPOL on the user port
About this task
Enable EAPOL on the user port.
Procedure
1. Use the eapol port <port> status auto command to enable EAPOL on the
2. Verify whether errors are displayed. No error or warning messages should be
Troubleshooting
UBP globally.
port.
displayed.
EAP user role (UBP) is not being applied
December 2013 77