Procedure
1. Review the ACLI, EDM, and SNMP ARP information.
2. Compare ARP table entries for discrepancies.
Clearing the ARP cache
About this task
Use the following procedure to completely clear the ARP cache of both static and dynamic
entries.
Procedure
1. Enter the Privileged EXEC mode in ACLI.
2. At the prompt, type the clear arp-cache command.
Deleting an ARP entry in ACLI or EDM
About this task
You can use ACLI or EDM to remove individual ARP entries.
Procedure for ACLI
Procedure
1. Enter the ACLI Privileged Exec mode.
2. At the prompe, type the no ip arp <a.b.c.d> command to delete the entry.
Procedure for EDM
Procedure
1. In EDM, select IP Routing > IP > ARP
2. In the ARP table, select the entry to delete.
3. Click delete.
Troubleshooting
ARP not forwarding traffic correctly
December 2013
143