Avaya 5000 Series Troubleshooting Manual page 138

Troubleshooting layer 2 and layer 3
Procedure
Figure 66: Confirming global L3 routing
Displaying IP Routing information
About this task
Display IP Routing Information for the switch to determine whether it is enabled.
Procedure
1. Enter the ACLI Privileged EXEC command mode.
2. At the prompt, type the show ip routing command.
3. Review the command output to determine whether or not IP Routing is enabled.
138 Troubleshooting
Comments? infodev@avaya.com
December 2013