Adding a port to the VLAN
About this task
Change the VLAN setting to use the correct port.
Procedure
Use the vlan members add <1-4094> <port> command to move the port to
desired VLAN.
NEAP user policies from RADIUS not applied
If NEAP user policies from the RADIUS server are not applied, use the work flows and
procedures in this section to help you correct the faults.
Work flow: NEAP user policies from RADIUS not applied
When user policies from the RADIUS server are not applied, use the following work flow and
associated procedures to assist you to develop a solution.
Troubleshooting
NEAP user policies from RADIUS not applied
December 2013
115