Avaya 5000 Series Troubleshooting Manual page 162

Troubleshooting layer 2 and layer 3
Figure 77: Correct mismatch
Showing IP OSPF interface VLAN information
About this task
Use this procedure to display IP OSPF information for each VLAN interface.
Procedure
1. At the ACLI command prompt, enter the show ip ospf interface vlan
2. Review the command output to verify the authentication type. Example —
Showing IP OSPF interface authentication methods
About this task
Use this procedure to display the authentication methods for all interfaces.
162 Troubleshooting
<vid> command to display the authentication type.
Authentication Type: None
Comments? infodev@avaya.com
December 2013