Enabling EAP globally and setting the port to automatic EAP
About this task
Make the required changes to ensure the settings are correct.
Procedure
1. Use the eapol enable command to enable EAP globally.
2. Use the eapol status auto command to change port EAP status to
Showing EAPOL multihost
About this task
Display the EAPOL Multihost information for review.
Procedure
1. Enter the show eapol port multihost command to display the information.
2. Verify that the option, Use RADIUS To Authenticate NonEAPOL Clients is
Formatting non-EAPOL RADIUS password attribute
About this task
Use the RADIUS server vendor documentation to change the non-EAPOL RADIUS password
attribute format to IpAddr.MACAddr.PortNumber on the RADIUS server.
Enabling RADIUS to authenticate non-EAP clients
About this task
Use the RADIUS server vendor documentation to make and apply the required changes to
authenticate Non-EAP clients on the RADIUS server.
Troubleshooting
• The port is set for EAP automatically (eap-auto).
automatic.
enabled.
NEAP MHSA MAC is not authenticating
December 2013
107