Configure Router Ids - Avaya 5000 Series Troubleshooting Manual

Procedure
1. At the ACLI command prompt, enter the show ip ospf ifstats command.
2. Review the command output.
Configuring the neighbor devices
About this task
Neighbor devices must be properly configured.
Procedure
Use the vendor documentation to ensure that neighbor devices are correctly
configured.

Configure router IDs

Change the router ID as appropriate to ensure that it is unique.
Task flow: Configure router IDs
You can use the following task flow to help configure router IDs to ensure they are unique.
Troubleshooting
Failure to establish OSPF adjacency
December 2013 159