Figure 47: RADIUS server configuration error
Configuring MAC and password on RADIUS server
About this task
The RADIUS server requires the correct MAC and password for the switch. If they are not
correct, the switch cannot authenticate.
To configure the correct MAC and password for the switch on the RADIUS server, refer to the
vendor documentation for the RADIUS server
NEAP MHSA MAC is not authenticating
Ensure that the switch is configured correctly.
Work flow: NEAP MHSA MAC is not authenticating
When an MHSA MAC is not authenticating you can use the following work flow to assist in
determining the solution.
Troubleshooting
NEAP MHSA MAC is not authenticating
December 2013
103