2. Observe no packet loss to confirm connection.
Configure RADIUS VSA for the user
This section provides information about configuring the RADIUS VSA for the user.
Task flow: Configure RADIUS VSA for user
The following task flow assists you to configure the RADIUS VSA for a user.
Figure 30: Configure RADIUS VSA for user
Configuring RADIUS VSA for the user
About this task
Configure the RADIUS VSA for the user.
Procedure
1. Obtain the Vendor documentation for the RADIUS server.
2. Make VSA correction for the user according to the vendor documentation. At least
Troubleshooting
one UROL string is to be declared.
EAP user role (UBP) is not being applied
December 2013
73