Avaya 5000 Series Troubleshooting Manual page 207

Enabling IP Routing
About this task
You must enable IP Routing globally on the switch.
Procedure
1. At the ACLI Global Configuration command prompt, enter ip routing to enable
2. Review the command output to ensure that IP Routing is enabled.
Showing IP VRRP details
About this task
You can verify that VRRP is enabled globally.
Procedure
1. At the ACLI command prompr, enter the command show IP VRRP.
2. Review the command output to determine whether or not VRRP is enabled.
Enabling global VRRP
About this task
You can use this procedure to enable VRRP globally.
Procedure
1. At the ACLI Global Configuration command prompt, enter router vrrp
2. Review the command output for errors.
Showing IP VRRP interface details
About this task
Verify that the Virtual Router is enabled.
Troubleshooting
Virtual Router is stuck in the initialize state when it should be master or backup
IP Routing globally on switch.
enable enable VRRP globally on the switch.
December 2013 207