Avaya 5000 Series Troubleshooting Manual page 79

Displaying QoS UBP
About this task
Obtain details of QoS agent settings.
Procedure
1. Use the show qos ubp command to display UBP sets.
2. Verify that the UBP set name matches the UROL string configured on the Radius
Creating UBP set
About this task
Create a UBP set to configure the template policy to be applied to the authenticated user
port.
Procedure
1. Use the following commands to create the desired UBP set.
2. Identify if errors are displayed.
Displaying QoS resource allocation
About this task
Use this procedure to obtain details about QoS resources usage.
Procedure
1. Use the show qos diag command to display QoS resource utilization.
2. Verify the port designated for user authentication, as follows:
Troubleshooting
Server, for example, if UBP Set is named student then the UROL string sent by the
RADIUS server is to be UROL student.
a. qos ubp classifier
b. qos ubp set
No error or warning messages should be displayed.
if ((Non QoS masks + QoS mask < 16) and ( Non QoS Filters + QoS Filters < 128))
EAP user role (UBP) is not being applied
December 2013 79