Avaya 5000 Series Troubleshooting Manual page 114

Troubleshooting authentication
Displaying EAPOL multihost interface information
About this task
Display the EAPOL multihost information for review.
Procedure
1. Enter the show eapol multihost interface <port#> command to display
2. Review the information to verify the following:
Enabling Non-EAP phones
About this task
Change the multihost setting to allow non-EAP phones.
Procedure
1. Use the eapol multihost non-eap-phone-enable command to allow NEAP
2. Review the command output for errors.
Displaying VLAN information
About this task
Display the VLAN information for review.
Procedure
1. Enter the show vlan command to display the information.
2. Verify the following:
114 Troubleshooting
the information.
• Allow Non-EAP Phones: Enabled
Phones.
• Ensure that the port belongs to the desired VoIP VLAN.
Comments? infodev@avaya.com
December 2013