Correct Arp Entries - Avaya 5000 Series Troubleshooting Manual

Procedure
1. In EDM, navigate to IP Routing > IP > ARP.
2. Review the information on the ARP page.
Completing an SNMP walk to objects
About this task
Use the SNMP walk to assist in the diagnosis of the ARP situation.
Procedure
1. Enter the SNMP walk command on the ipNetToMediaIfIndex object.
2. Enter the SNMP walk command on the ipNetToMediaPhysAddress object.
3. Enter the SNMP walk command on the ipNetToMediaNetAddress object.
4. Enter the SNMP walk command on the ipNetToMediaType object.

Correct ARP entries

You can use ACLI, EDM, or SNMP to correct ARP entries.
Task flow: Correct ARP entries
The following task flow can help you to correct ARP entries using ACLI, EDM, or SNMP.
Troubleshooting
ARP not forwarding traffic correctly
December 2013 141