Avaya 5000 Series Troubleshooting Manual page 97

Procedure
Enter show eapol multihost interface <port#> to display the EAPOL
multihost interface information.
Result
Non-EAPOL clients are enabled.
Multihost status is enabled.
Enabling multihost and allowing non-EAPOL clients
About this task
Use the following procedure to correct the Non-EAP client attribute.
Procedure
1. Enter eapol multihost allow-non-eap-enable to allow non-EAPOL
2. Enter eapol multihost enable to enable multihost.
Showing EAPOL multihost non-eap-mac interface
About this task
Use the following procedure to display EAPOL multihost interface information.
Procedure
1. Enter the show eapol multihost non-eap-mac interface <port>
2. Verify that the MAC is in the list that the command displays.
Ensuring the MAC is in the list
About this task
Use the following procedure to add the MAC address to the list if it is not already there.
Troubleshooting
clients.
command.
Configured MAC is not authenticating
December 2013 97