Set Ftp - HIKVISION iDS-TCH44P-B User Manual

Network Traffic Camera (Multi-lens LPR Camera) User Manual

5.1.2 Set FTP

Set FTP parameters if you want to upload the captured pictures to the FTP server.
Before You Start
Set the FTP server, and ensure the device can communicate normally with the server.
Steps
1. Go to Configuration → Device Configuration → Encoding and Storage → FTP .
2. Optional: Check Upload Additional Information to FTP, and then the related information can be
attached when uploading.
3. Enable the FTP server.
4. Set FTP parameters.
1) Enter Server Address and Port.
2) Enter User Name and Password, and confirm the password.
3) Select Directory Structure.
Note
If multiple directories are needed, you can customize the directory name.
5. Optional: Check Not Upload Plate Close-up if the license plate close-up pictures are not needed
to upload.
6. Set the name rule and separator according to the actual needs.
7. Optional: Edit OSD information which can be uploaded to the FTP server with the pictures to
make it convenient to view and distinguish the data.
8. Optional: Click Test to test the FTP server connection.
Figure 5-2 Set FTP
22