Table of Contents
Advertisement
It shows the percentage of the remaining lifespan. The lifespan of a memory card may be
influenced by factors such as its capacity and the bitrate. You need to change the memory
card if the remaining lifespan is not enough.
Health Status
It shows the condition of your memory card. You will receive a notification if the health status
is anything other than good when the Arming Schedule and Linkage Method are set.
Note
It is recommended that you change the memory card when the health status is not "good".
3. Click R/W Lock to set the permission of reading and writing to the memory card.
- Add a Lock
a. Select the Lock Switch as ON.
b. Enter the password.
c. Click Save
- Unlock
If you use the memory card on the device that locks it, unlocking will be done automatically
●
and no unlocking procedures are required on the part of users.
If you use the memory card (with a lock) on a different device, you can go to HDD
●
Management to unlock the memory card manually. Select the memory card, and click
Unlock. Enter the correct password to unlock it.
- Remove the Lock
a. Select the Lock Switch as OFF.
b. Enter the password in Password Settings.
c. Click Save.
Note
Only admin user can set the R/W Lock.
●
The memory card can only be read and written when it is unlocked.
●
If the device, which adds a lock to a memory card, is restored to the factory settings, you can
●
go to HDD Management to unlock the memory card.
4. Set Arming Schedule and Linkage Method. See Set Arming Schedule and Linkage Method
Settings for details.
5. Click Save.
6.1.2 Set FTP
You can configure the FTP server to save images which are captured by events or a timed snapshot
task.
Before You Start
Get the FTP server address first.
Network Speed Dome User Manual
37
Advertisement
Table of Contents
