Table of Contents
Advertisement
The saving path of network disk files.
Mounting Type
Select file system protocol according to the operation system.
Enter user name and password of the net HDD to guarantee the security if SMB/CIFS is
selected.
3. Click Test to check whether the network disk is available.
4. Click Save.
10.1.3 Set FTP
You can configure the FTP server to save images which are captured by events or a timed snapshot
task.
Before You Start
Get the FTP server address first.
Steps
1. Go to Configuration → Network → Advanced Settings → FTP.
2. Configure FTP settings.
FTP Protocol
FTP and SFTP are selectable. If SFTP is selected, the files uploading is encrypted using SFTP
protocol.
SSH File Transfer Protocol (SFTP) uses SSH as the encryption protocol. SFTP server is required
when you select the protocol.
Server Address and Port
The FTP server address and corresponding port.
User Name and Password
The FTP user should have the permission to upload pictures.
If the FTP server supports picture uploading by anonymous users, you can check Anonymous
to hide your device information during uploading.
Note
If SFTP is used, logging into the FTP server anonymously is now allowed.
Directory Structure
The saving path of snapshots in the FTP server.
3. Click Upload Picture or Upload Video to enable uploading snapshots or videos to the FTP
server.
4. Click Test to verify the FTP server.
5. Click Save.
Thermal Network Camera User Manual
48
Advertisement
Table of Contents
