Notify Surveillance Center; Trigger Recording; Audible Warning - HIKVISION DS-2XC6285G0-L User Manual

Note
If you want to use STARTTLS, make sure that the protocol is supported by your email server.
If you check the Enable STARTTLS while the protocol is not supported by your email sever,
your email is sent with no encryption.
4) Optional: If you want to receive notification with alarm pictures, check Attached Picture. The
notification email has a certain number of attached alarm pictures about the event with
configurable image capturing interval.
Note
The number of alarm pictures may vary according to different device models and different
events.
5) Input the recipient's information, including the recipient's name and address.
6) Click Test to see if the function is well configured.
3. Click Save.

7.2.4 Notify Surveillance Center

Check Notify Surveillance Center, the alarm information is uploaded to the surveillance center
when an alarm event is detected.

7.2.5 Trigger Recording

Check Trigger Recording, and the device records the video about the detected alarm event.
For recording settings, refer to Video Recording and Picture Capture .

7.2.6 Audible Warning

After enabling Audible Warning and setting Audible Alarm Output, the built-in speaker of the
device or connected external speaker plays warning sounds when an alarm happens.
For audible alarm output settings, refer to Set Audible Alarm Output .
Note
The function is only supported by certain camera models.
Set Audible Alarm Output
When the device detects targets in the detection area, audible alarm can be triggered as a
warning.
Steps
1. Go to Configuration → Event → Alarm Setting → Audible Alarm Output .
Network Camera User Manual
46