Thermal Optical Bi-spectrum Network Camera User Manual
When you select SSL or TLS, and disable STARTTLS, emails are sent after encrypted by SSL or
●
TLS. The SMTP port should be set as 465.
When you select SSL or TLS and Enable STARTTLS, emails are sent after encrypted by
●
STARTTLS, and the SMTP port should be set as 25.
Note
If you want to use STARTTLS, make sure that the protocol is supported by your email server.
If you check the Enable STARTTLS while the protocol is not supported by your email sever,
your email is sent with no encryption.
4) Optional: If you want to receive notification with alarm pictures, check Attached Image. The
notification email has 3 attached alarm pictures about the event with configurable image
capturing interval.
5) Configure Alarm E-mail Attachment Settings.
Image
Select the number of captures of the corresponding channel.
0: It will not upload the image of the seletced channel.
●
1: It will only upload the image captured when the alarm is triggered.
●
3: It will upload the images captured about 1 s before and after the alarm is triggered, as
●
well as the image captured when the alarm is triggered.
Video
Select the video channel and video duration as required.
0 s: It will not upload the video of the seletced channel.
●
3 s: Upload the video that is recorded about 1 s before and 2 s after the alarm is
●
triggered.
5 s: Upload the video that is recorded about 2 s before and 3 s after the alarm is
●
triggered.
7 s: Upload the video that is recorded about 2 s before and 5 s after the alarm is
●
triggered.
6) Input the receiver's information, including the receiver's name and address.
7) Click Test to see if the function is well configured.
3. Click Save.
9.2.4 Notify Surveillance Center
Check Notify Surveillance Center, the alarm information is uploaded to the surveillance center
when an alarm event is detected.
9.2.5 Trigger Recording
Check Trigger Recording, and the device records the video about the detected alarm event.
74