11.7
Removing the fork protector
11.8
Installing the fork protector
–
Position the brake caliper.
–
Mount and tighten screws
Guideline
Screw, front
brake caliper
–
Position the brake line and the clamp. Mount and tighten
7
screws
.
–
Remove the motorcycle from the lift stand. (
S04329-10
–
Operate the front brake and compress the fork a few times firmly.
The fork legs straighten.
–
Tighten screws
Guideline
Screw, fork stub
–
Remove screws
–
Remove screws
–
Remove screws
S04330-10
–
Position the fork protector on the right fork leg. Mount and tighten
1
screws
.
Guideline
Remaining screws,
chassis
–
Position the fork protector on the left fork leg. Mount and tighten
2
screws
.
Guideline
S04331-10
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten screws
SERVICE WORK ON THE CHASSIS 11
6
.
M8
25 Nm (18.4 lbf ft)
8
.
M8
15 Nm (11.1 lbf ft)
1
and take off the clamp.
2
on the left fork leg. Take off the fork protector.
3
on the right fork leg. Take off the fork protector.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
Loctite
®
243™
p. 42)
3
.
45