Removing The Fork Protector; Installing The Fork Protector - GAS GAS MC 85 2023 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.7
11.8
44
S04329-10

Removing the fork protector

S04330-10

Installing the fork protector

S04331-10
–
Position the brake caliper.
–
6
Mount and tighten screws
Guideline
Screw, front M8
brake caliper
–
Position the brake line and the clamp. Mount and tighten
7
screws .
–
Remove the motorcycle from the lift stand. (
–
Operate the front brake and compress the fork a few times firmly.
The fork legs straighten.
–
8
Tighten screws .
Guideline
Screw, fork stub
–
1
Remove screws and take off the clamp.
–
2
Remove screws on the left fork leg. Take off the fork protector.
–
3
Remove screws on the right fork leg. Take off the fork protector.
–
Position the fork protector on the right fork leg. Mount and tighten
1
screws .
Guideline
Remaining screws,
chassis
–
Position the fork protector on the left fork leg. Mount and tighten
2
screws .
Guideline
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten screws
.
25 Nm (18.4 lbf ft)
Loctite
p. 41)
M8 15 Nm (11.1 lbf ft)
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
® 243™
3
.