11.7
Removing the fork protector
11.8
Installing the fork protector
11.9
Removing the lower triple clamp
–
Remove screws
–
Remove screws
–
Remove screws
F00024-10
–
Position the fork protection on the left fork leg. Mount and tighten
1
screws
.
Guideline
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten screws
–
Position the fork protector on the right fork leg. Mount and tighten
3
screws
.
F00024-11
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the start number plate. (
–
Remove front fender. (
–
Remove the handlebar cushion.
Main work
–
1
Remove screw
–
2
Remove screw
–
Take off the upper triple clamp with the handlebar and hang them
to the side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
S04530-10
SERVICE WORK ON THE CHASSIS 11
1
. Remove the clamp.
2
. Take off the left fork protector.
3
. Take off the right fork protector.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 42)
(
p. 82)
(
p. 43)
p. 49)
p. 50)
.
.
2
.
45