Removing The Fork Protector; Installing The Fork Protector; Removing Motor Guard (Mc 450F Troy Lee Designs) - GAS GAS MC 450F 2022 Owner's Manual

11.5

Removing the fork protector

11.6

Installing the fork protector

11.7

Removing motor guard (MC 450F TROY LEE DESIGNS)

–
Press the dust boots back into their installation position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. (
–
Remove the motorcycle from the lift stand. (
–
Remove screws
–
Remove screws
–
Remove screws
A00777-10
–
Position the fork protector on left fork leg. Mount and tighten
1
screws .
Guideline
Remaining screws,
chassis
–
Position the brake line and the clamp. Mount and tighten
2
screws .
Guideline
A00777-11
Screw, brake line
holder
–
Position the fork protector on the right fork leg. Mount and tighten
3
screws .
Guideline
Remaining screws,
chassis
–
Remove screws
S05115-10
SERVICE WORK ON THE CHASSIS 11
p. 51)
1
and take off the clamp.
2
and take off the left fork protector.
3
and take off the right fork protector.
M6 10 Nm (7.4 lbf ft)
EJOT 1.7 Nm (1.25 lbf ft)
M6 10 Nm (7.4 lbf ft)
1
.
p. 49)
51