Removing Fork Protector; Installing The Fork Protector; Bleeding The Fork Legs - GAS GAS ES 700 2023 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.6
11.7
11.8
52

Removing fork protector

V02714-10

Installing the fork protector

V02714-11

Bleeding the fork legs

S04313-12
–
1
Remove screws and take off the clamp.
–
2
Remove screws on the left fork leg. Take off the fork protector.
–
2
Remove screws on the right fork leg. Take off the fork protector.
–
Position the left fork protector. Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Position brake line, wiring harness, and clamp. Mount and tighten
2
screws .
–
Position the right fork protector. Mount and tighten screws
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
1
Release bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
Info
Carry out this operation on both fork legs.
Finishing work
–
Remove the motorcycle from the lift stand. (
1
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 50)
.
p. 51)
.
1
.