Installing The Fork Protector; Removing The Fork Legs - GAS GAS MC50 2021 Owner's Manual

11.6

Installing the fork protector

11.7

Removing the fork legs

–
Remove screws
F02977-10
–
Position fork protector on the right fork leg. Mount and tighten
1
screws .
Guideline
Remaining screws,
chassis
F02977-11
–
Position fork protector on left fork leg. Mount and tighten
2
screws .
Guideline
Remaining screws,
chassis
–
Position the brake line and the clamp. Mount and tighten
3
screws .
Guideline
F02976-11 Screw, brake line
bracket
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
Remove screws
–
Remove screws
–
Allow the brake caliper and the brake line to hang loosely to the
side.
Info
Do not kink the brake line.
F03020-10
SERVICE WORK ON THE CHASSIS 11
3
on the right fork leg. Take off the fork protector.
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
EJOT 1.7 Nm (1.25 lbf ft)
p. 37)
( p. 75)
1
and take off the clamp.
2
and take off the brake caliper.
39