11 SERVICE WORK ON THE CHASSIS
11.5
11.6
11.7
46
Removing the fork protector
A00777-10
Installing the fork protector
A00777-11
Removing the fork legs
I00175-10
Finishing work
–
Install the fork protector. (
–
Remove the motorcycle from the lift stand. (
–
1
Remove screws
and take off the clamp.
–
2
Remove screws
and take off the left fork protector.
–
3
Remove screws
and take off the right fork protector.
–
Position the fork protector on left fork leg. Mount and tighten
1
screws
.
Guideline
Remaining screws,
chassis
–
Position the brake line and the clamp. Mount and tighten
2
screws
.
Guideline
Screw, brake line
holder
–
Position the fork protector on the right fork leg. Mount and tighten
3
screws
.
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
1
Remove screws
and take off the clamp.
–
2
Remove screws
and take off the brake caliper.
–
Allow the brake caliper and the brake line to hang loosely to the
side.
Info
Do not actuate the hand brake lever when the front wheel is
removed.
p. 46)
p. 44)
M6
10 Nm (7.4 lbf ft)
EJOT
1.7 Nm (1.25 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 44)
(
p. 89)