Using Regional Preset; Current Regional Preset; Factory Default Regional Preset - GE LOGIQ 7 Service Manual

GE H
EALTHCARE
D 2286865, R
IRECTION EVISION
4-2-6-2

Using Regional Preset

Regional Preset is selected during Application Load (Refer to 8-8-13 - Installing R7.x.x Application
Software for details).
Current Regional Preset is displayed under Utility > System > About .
For Upgraded BT07, this field always shows "None" as Region Preset is feature available for pure BT07
NOTICE
and onward.
Factory Default Regional Preset can be re-loaded from Utility > Systme > About > Additional About.
4-12
14
Figure 4-14 Current Regional Preset
Figure 4-15 Factory Default Regional Preset
Section 4-2 - General Procedure
LOGIQ™ 7 S M
ERVICE ANUAL