Removing Bolts; Removing Ghost Cd-Rom - GE LOGIQ 7 Service Manual

GE H
EALTHCARE
D 2286865, R
IRECTION EVISION
1-3-11 How to remove the Ghost CD-ROM
The sharp edge of the PC Box Cover are chamfered before shipment. However, the Ghost CD-ROM
must be removed with the PC-Box cover open according to the following steps.
1.) Disconnect the DVI-D connector, then remove the four mounting bolts (three hex bolts and one
Hex bolt
2.) Open the PC box cover and remove the Ghost CD-ROM from the PC box.
1-20
14
phillips screw).
PC Box Cover
Figure 1-7 Removing Bolts
PC Box Cover
Open
Figure 1-8 Removing Ghost CD-ROM
Section 1-2 - Important Conventions
(cont'd)
Phillips screw
Hex bolts
LOGIQ™ 7 S
ERVICE
DVI-D connector
Ghost CD-ROM
M
ANUAL