Regional Option - GE LOGIQ 7 Service Manual

Hide thumbs Also See for LOGIQ 7:

Table of Contents

Regional Setup (For the system with language other than English ONLY) (cont'd)

1.) Select Utility> System> General>Regional Option Menu,

2.) Click on Languages tab.

3.) Check Install files for East Asian languages.

4.) Click on Apply.

5.) The system requires the re-boot automatically, shut down the system.

You do not need to change "Language used in menus and dialogs" option. It should be English.

Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)

Figure 8-100 Regional Option