Loadsoftware.bat - GE LOGIQ 7 Service Manual

GE H
EALTHCARE
D 2286865, R
IRECTION EVISION
8-2-9-1 Installing R8.x.x Application Software (cont'd)
3.) Double-click on LoadSoftware.bat.
4.) The Installation program will start, and the command prompt screen will be shown on the monitor
as shown.
5.) Select TYPE A - BT09 with BEP4 does not have PRO version available.
1.If wrong application software installed, the system will not work properly.
NOTICE
2.You will ask confirmation twice as below. If you select wrong system (A or B) , please select "N" at the
confirmation.
8-30 Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)
14
Figure 8-88 LoadSoftware.bat
LOGIQ™ 7 S M
ERVICE ANUAL