Product Icons; Warnings - GE LOGIQ 7 Service Manual

GE H
EALTHCARE
D 2286865, R
IRECTION EVISION
1-2-3

Product Icons

The following table describes the purpose and location of safety labels and other important information
provided on the equipment.
Table 1-5 Warnings
Label/Symbol
Identification and Rating Plate
Type/Class Label
IP Code (IPX8)
Device Listing/Certification Labels
CAUTION - This unit weighs...Special
care must be used to avoid..."
"DANGER - Risk of explosion
used in..."
14
Purpose/Meaning
Manufacturer's name and address
Date of manufacture
Model and serial numbers
Electrical ratings
Used to indicate the degree of safety
or protection.
Indicates the degree of protection
provided by the enclosure per IEC60
529. IPX8 indicates can be used in
operating room environment.
Equipment Type BF (man in the box
symbol) IEC 60878-02-03 indicates B
Type equipment having a floating
applied part.
Equipment Type CF (heart in the box
symbol) IEC 878-02-05 indicates
equipment having a floating applied
part having a degree of protection
suitable for direct cardiac contact.
Laboratory logo or labels denoting
conformance with industry safety
standards such as UL or IEC.
This precaution is intended to prevent
injury that may result if one person
attempt to move the unit considerable
distances or on an incline due to the
weight of the unit.
The system is not designed for use
with flammable anesthetic gases.
"CAUTION" The equilateral triangle is
usually used in combination with
other symbols to advise or warn the
user.
ATTENTION - Consult accompanying
documents is intended to alert the
user to refer to the operator manual or
other instructions when complete
information cannot be provided on the
label.
Section 1-2 - Important Conventions
LOGIQ™ 7 S
Location
Rear of console near power inlet
Footswitch
Probe connectors and PCG
connector
ECG connector and Probes marked
Type CF
Rear of console
On the console where easily seen
during transport
Rear of console
Various
Various
M
ERVICE ANUAL
Note
1-7