GE LOGIQ 7 Service Manual page 257

GE H
EALTHCARE
D 2286865, R
IRECTION EVISION
8-2-10-10 Regional Preset
For the system other than "NONE" selected as Regional Preset, resetting MUST be required.
NOTICE
9.) Touch Utility > System.
10.)Click About tab.
11.)Click Additional About Information.
12.)Check the region name of Preset Region (Rquires reboot):
If it is None, skip this section.
13.)Click Reload Factory Default button.
14.)Click OK on confirmation dialog box.
This changes Preset Region (Requires reboot) to None.
Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)
14
Figure 8-113 Preset Region
Figure 8-114 Reload Factory Default
LOGIQ™ 7 S M
ERVICE ANUAL
8-51