Osd Softment 2 - GE LOGIQ 7 Service Manual

GE H
EALTHCARE
D 2286865, R
IRECTION EVISION
6-5-5-1 For Gaudi LCD (cont'd)
11.)After finishing the Auto Adjustment procedures, the following menu is displayed on the LCD.
12.)Make sure that the LCD position is fixed and shown at the center location.
13.)If it is fixed appropriately, select OK then touch ENTER to go on to the next step.
If the display is not adjusted yet, select CANCEL then touch ENTER to repeat the adjustment
procedures form step 6.
14.)The first screen is shown on the display. Touch SELECT three times to select EXIT. Refer to Figure
6-19.
15.)Touch ENTER button. OSD menu will be finished, and go back to regular display.
14
10A5V1.0
FINISHED
OK
CANCEL
SELECT
Figure 6-20 OSD Softment 2
Section 6-5 - Monitor and LCD Adjustments
ENTER
LOGIQ™ 7 S M
ERVICE ANUAL
6-17