For Bt03 Or Lower; User Level; Access / Security; Access Authorization - GE LOGIQ 7 Service Manual

GE H
EALTHCARE
D 2286865, R
IRECTION EVISION
5-5-2-2 Service Login (cont'd)
4.) Select GE Service at the "Select User Level" field.
5.) Enter the password for the Service Platform.
6.) Click on Okay.
5-5-2-2-2

For BT03 or lower:

Click on the button with the wrench icon
the user or the Field Engineer (FE) to the service login screen.
5-5-2-3

Access / Security

The service interface has different access and security user levels. Users are only granted access to
the tools they are authorized to use.
Table 5-2 User Level

User Level

Operator
Administrator
External Service
GE Service
NOTE: *For a GE Field Engineer, the password changes at specific intervals.
Except for iLinq, all access to the service interface is via the Network port. A modem on the scanner is
specifically intended for iLinq use.
Every access request, whether successful or not, will be logged into a service access log that is
viewable to authorized users.
5-28
14
Figure 5-48 User Level
in the status bar at the bottom of the scanner console. This button links
These service tools are normally used in-house and are protected with a special scanner configuration
that is not allowed to leave the facility.
Use the OnLine Center access method provided by iLinq .
Required for a external Service other than GE FE.
Requires a network connection and knowledge of a password.*
Section 5-5 - Common Service Platform

Access Authorization

LOGIQ™ 7 S M
ERVICE ANUAL