Cleaning Rollers - GE LOGIQ 7 Service Manual

Hide thumbs Also See for LOGIQ 7:

Table of Contents

Cleaning the Trackball

7.) Wipe off any oil or dust from the two rollers using a cleaner or cotton bud.

When cleaning the roller, make sure not to spill or spray any liquid into the trackball housing (Keyboard

or system). Use either ethanol, isopropyl alcohol or VCR head cleaner to clean the trackball assembly.

Avoid other solvents that may damage the mechanical parts of the trackball assembly.

Figure 6-44 Cleaning Rollers

Section 6-7 - Cleaning the Trackball