Lcd Monitor Resolution; Lcd Touch Panel Adjustment; Logo Location - GE LOGIQ 7 Service Manual

Hide thumbs Also See for LOGIQ 7:

Table of Contents

LCD Monitor Resolution

Should one encounter "small screen" on the LCD monitor, screen resolution must be adjusted in order

to view full size.

1.) From the touch panel, select Utility > System > About.

2.) Click Additional About Info.

3.) Select High Resolution.

There are two types of the touch panel LCD in LOGIQ 7 (manufactured by Gaudi or Technart).

Depending on the LCD type on the system, adjustment procedure is slightly different. Some models of

LOGIQ 7 have the LCD with the cover plate. Open the key board and remove those plate to identify the

This adjustment must be performed when always replacing:

Figure 6-15 LOGO Location

Keyboard Assy

Cable between LCD unit and PC Box

Section 6-5 - Monitor and LCD Adjustments

Technart Logo