GE LOGIQ 7 Service Manual page 30

GE H
EALTHCARE
D 2286865, R
IRECTION EVISION
Table 1-5 Warnings
Label/Symbol
1-8
14
Purpose/Meaning
"General Warning Sign"
"Warning" - Dangerous voltage" (the
lightning flash with arrowhead) is
used to indicate electric shock
hazards.
"Mains OFF" Indicates the power off
position of the mains power switch.
"Mains ON" indicates the power on
position of the mains power switch.
"ON" indicates the power on position
of the power switch.
CAUTION
This Power Switch DOES NOT
ISOLATE Mains Supply
"Standby" indicates the power stand
by position of the power switch.
CAUTION
This Power Switch DOES NOT
ISOLATE Mains Supply
"Protective Earth" Indicates the
protective earth (grounding) terminal.
"Equipotentiality" Indicates the
terminal to be used for connecting
equipotential conductors when
interconnecting (grounding) with
other equipment.
Alternating Current symbol is in
accordance with IEC 60878-01-14.
This symbol indicates that waste
electrical and electronic equipment
must not be disposed of as unsorted
municipal waste and must be
collected separately. Please contact
an authorized representative of the
manufacturer for information
concerning the decommissioning of
your equipment.
Section 1-2 - Important Conventions
LOGIQ™ 7 S
Location
Rear panel and UPS battery
Rear panel and inside of console
Rear of system adjacent to mains
switch
Rear of system adjustment to mains
switch
Adjacent to On/Standby Switch
Various
Rear of console
Rear Panel, Rating Plate, Circuit
breaker label of console and front
panel (if applicable).
Rear Panel
M
ERVICE ANUAL
Note
BT07 or later
BT07 or later
BT07 or later
BT07 or later