Installing R8.X.x Application Software; Desktop - GE LOGIQ 7 Service Manual

GE H
EALTHCARE
D 2286865, R
IRECTION EVISION
8-2-9

Installing R8.x.x Application Software

You must install BT09 Base image before Application Software installation. If not, Application shows the
NOTICE
error message, "Service platform is out of date. You must reghost the C drive and reinstall the software."
If you are attempting to install only application software, you MUST first check current Regional Preset
NOTICE
Value. Press Utility > System > About (Details in 4-2-6 - Archiving and Loading Presets for BT07
(Including R7.5.x)).
8-2-9-1 Installing R8.x.x Application Software
1.) Power ON the scanner. The windows desktop appears.
At this time, the DVD writing software screen appears, but you can ignore the screen.
NOTICE
2.) Insert the Application Software CD-ROM into the DVD drive.
Wait approx. 20 seconds until the disk can be read.
NOTICE
Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)
14
Figure 8-87 Desktop
LOGIQ™ 7 S M
ERVICE ANUAL
8-29