Product Labels And Icons - GE Voluson E Series Service Manual

Introduction
Laser Radiation Hazard
Indicates the risk of injury from laser radiation.
Non-ionizing Hazard
Indicates the risk of injury from non-ionizing radiation.
Operating LED
Indicates the risk of injury from light beams entering the eye. Do not stare into the light beam of the LED.
Electrostatic Discharge (ESD) Hazard
Describes precautions necessary to avoid static electricity that will or can damage integrated circuits.
This icon is used when options or features are specific for BT-Software versions.
This icon is used for special hints, or tips that may facilitate servicing a Voluson E-Series system.
Notes are used to provide important information about an item or a procedure.
Note
Be sure to read the notes; the Information contained in a note can often save you time or effort.
Standard icons that indicate that a special procedure is to be used
Other icons make you aware of specific procedures that should be followed.
Avoid Static Electricity

1.4.3 Product Labels and Icons

The following table describes the purpose and location of labels, safety icons and other important information
provided on the equipment.
For description of all symbols and labels used in combination with this Voluson E-Series ultrasound system,
Note
refer to Chapter 2 in the Basic User Manual.
LABEL/SYMBOL PURPOSE/MEANING
Manufacturer's name and address
Identification and
Model and Serial numbers
Rating Plate
Electrical ratings
Manufacturer's name and address
Date of manufacture
1-16
Table 1-6 Standard icons that indicates that a special procedure is to be used
Tag and Lock Out
Table 1-7 Product Labels and Icons
Wear Eye Protection Wear Hand Protection
LOCATION
rear side of the system
on plug of each probe
Identification and Rating Plate
(rear side of the system / on plug of each probe)
Identification and Rating Plate
(rear side of the system / on plug of each probe)
Wear Foot Protection
Voluson E-Series Service Manual
KTD106657 Revision 2