4062-XXX
Type 2 fuser unit assembly
In the type 2 fuser unit assembly, the detacs, which are used to prevent the media from sticking to the hot roll,
do make full contact with the hot roller. The type 2 fuser unit assembly has a life of 150K.
Exit
The standard media exit ejects printed media from the printer to the standard bin .
Sensor (standard bin full)
The sensor (standard bin full) detects whether the standard bin is full by moving the actuator up and down.
3-74
Service Manual
Hot roll
Fuser lamp
Pressure roll
Hot roll
Pressure roll
Sensor (Standard bin exit)
Full contact detac
Full contact detac
Previous
Next
Go Back