Display Type - SIGLENT SDS1000X-E Series User Manual

SDS1000X-E&SDS1000X-U User Manual

Display Type

Press the Display button on the front panel, and then press the Type softkey to
select Vectors or Dots display type.
Vectors: the sample points are connected by lines and displayed. Normally,

this mode can provide the most vivid waveform to view the steep edge of the
waveform (such as square waveform).
Dots: display the sample points directly. You can directly view each sample

point and use the cursor to measure the X and Y values of the sample point.
Figure 94 Vectors Display
153
WWW.SIGLENT.COM