Math Operators; Addition Or Subtraction - SIGLENT SDS1000X-E Series User Manual

SDS1000X-E&SDS1000X-U User Manual

Math Operators

The oscilloscope
multiplication, division), FFT (Fourier transform) operation and math function
operation (differential, integral, square root).

Addition or Subtraction

Math operators perform arithmetic operations add or subtract operation on any
two analog input channels. When you select addition or subtraction, the Source A
and Source B values are added or subtracted point by point, and the result is
displayed.
1. Press the Math button on the front panel to enter the MATH function menu.
2. Press the Source A and Source B softkey respectively, and then turn the
Universal Knob to select the source to do math operation. Addition or
Subtraction can be applied between Analog channels or between reference
waveforms.
3. Press the Operation softkey and then turn the universal to select + or - to make
addition or subtraction operation. The resulting math waveform is displayed in
white and labeled with "M".
4. If you want to invert the math waveform, press the Invert button and set the
supports math count
Figure 70 C1+C2 Waveform
operation (Addition,
126
subtraction,
WWW.SIGLENT.COM